MTB Framed 29er – Few Things You Should Know

MTB Framed 29er mountain bike comes with various pros and cons. This article will talk about everything that has to do with 29er bikes to understand what a 29er mountain bike is. Also, we’ll tell you how to choose the right frame for the way you ride.

Part 1: Overview of MTB Framed 29er Mountain Bike

Since the 2010 season, mtb frame 29er has been increasingly popular because of its several advantages over the standard 26″ mountain bike. The rider of a 29-frame mountain bike can reach a faster top speed because the wheels are bigger. They also give you better overall traction because their footprint is bigger, and they roll over rocks, roots, and other obstacles much easier than smaller bikes. Because 29er mountain bikes roll over obstacles much easier than 26″ mountain bikes, many 29er riders quickly realize that they no longer need to avoid roots, ruts, rocks, stumps, etc.

framed 29er

These things add up to making a more stable bike and give the rider more confidence. Also, because 29er wheels are more forgiving, designers quickly realized that they could use less suspension to get the same feel as a 26 “bike, which makes the bike work better because the pedals don’t move as much. Most people agree that a 29er mountain bike with 100-120mm of travel feels same like a 26 “with 140 mm of travel. Lastly, If you’re riding a 29er, you can do more with less travel.


  • Better Momentum
  • Higher “Attack Angle”
  • Extra Grip and Traction
  • Added Grip and Balance in Corners
  • Comfortable Ride
  • Extra Pinch Flat Resistance
  • Added Stability on Climbs and Descents
  • More Ground Clearance
  • Great For Taller Riders
  • Less Tire Wear
  • Less Bearing Wear and Resistance


  • Heavier Wheels
  • Weaker Wheels
  • Slower Acceleration
  • More Effort to Brake
  • More Effort to Turn
  • Laborious Tight Turns
  • Can Feel Too Tall
  • Limited Compatibility
  • Taller Gearing

Part 2: Front Suspension 29ers and Full Suspension 29ers

Mountain bikes with front suspension are popular for Cross Country riding, where speed and efficiency are important over longer distances. The fast-rolling 29-inch wheels keep their speed very well, so when riders push down on the pedals, they get more out of each stroke. In addition, these front suspension mtb 29 frame are lighter and have a geometry that makes them better for climbing than models that are better for going downhill.

You’ll feel like you can handle anything when you have full suspension and bigger wheels. Full suspension 29ers seem to be able to roll over anything and keep their line on the roughest trails. These bikes will take your skills to a whole new level, especially on steep, tricky descents.

Part 3: 29ers Mountain Bike Best For

Technical Climbs

29-inch mountain bikes need less momentum to roll over obstacles because they have a better angle of attack. On steeper climbs, technical features are more likely to slow you down and stop your momentum. Having bigger wheels will help you move faster and get up those steep hills. If you ride trails with steep, tricky climbs, a 29er will help you a lot.

Traction on Loose Terrain

You’ll want as much grip as possible, especially when riding on loose ground. Do you ride on trails with roots and rocks that can be slippery? What about loose gravel made of sand? You’ll love how 29ers make climbing and turning easier and give you more confidence if you do.

Stability on Descents

The bike tracks better and becomes more predictable with less impact from rocks and roots. As a result, when riding through rock gardens on a 29er, you’ll have more confidence in your handling because your wheel will stay in its line better. For those who prefer to plow through downhill obstacles, 29ers can help.

Speed and Efficiency

With a 29er mountain bike, the rider can keep their momentum better and go faster. You’ll like how quickly 29ers can cover ground if you race cross-country or just want to get the most out of each pedal stroke.

Part 4: The Best Way to Select a Mountain Bike Frame

You’ll love riding a bike that fits you well and is right for your height, flexibility, and riding style. A bike that fits you well can help you handle the trail better and give you more confidence to go on more technical and difficult rides. Here are some general tips for buying a mountain bike.

  • The first is to find a bike that suits your riding style because mountain bikes come in several types, such as cross-country, enduro, downhill, and trail bikes.
  • Find the right size frame. If you don’t start with the right frame, it will be hard to make it comfortable no matter what modifications you make later.
  • Once you find the right frame size, you can fine-tune the fit by making simple changes to the bike’s parts, such as the seat height and angle.
  • You can get help from a knowledgeable bike specialist or dealer to determine the proper bike size and customize the fit. We recommend you go to a bike shop to ride a variety of bikes to get immediate feedback on which one works best for you.

Sizes of Mountain Bikes

Mountain bikes usually come in S, M, and L sizes based on your height. A lot of bike makers have size charts that show a range of heights for each bike size.

Effective Top Tube and Reach

The horizontal distance between the head tube and the seat tube is known as the effective top tube (ETT), When measuring a bike, the ETT is a standard measurement to take into consideration because it gives a fair idea of how long you’ll be sitting on the bike. Reach measures the horizontal distance between the centre of the bottom bracket and the centre of the head tube. To better understand how long your mountain bike will feel while you’re out of the saddle, reach has become an increasingly common way to measure overall length.

Mountain Bike Standover Height

Even though it’s not used as often as it used to be to size bikes, your standover height can still tell you if a bike fits you or not. Begin by straddling your bike with both feet flat on the floor. When lifting a mountain bike, leave 2″ between the tyres and the ground. This allows for rapid dismounts on the trail. Aggressive riders commonly desire 3″-5″ of clearance. Keep in mind that your shoes may alter your overall leg length. Keep in mind that the slope of the top tube toward the rear wheel has a major impact on the amount of clearance. For instance, if the slope is steep, you will likely have sufficient clearance regardless of the size of your frame. Therefore, you cannot rely exclusively on standover clearance to determine whether or not a bike fits.

Mountain Bike Seat Height

To figure out if a bike fits you well, you need to make sure the seat height is set correctly so you can get a good feel for the bike. Correct position for climbing hills and riding on flat ground: When your foot is at the bottom of the pedal stroke, your leg should be slightly bent, about 80–90% of the way to full extension. This helps you use your big leg muscles to pedal more effectively and with more power. Position for descents: Lowering your seat lowers your centre of gravity, which gives you better control and more confidence on steep descents. You’ll have to try different seat heights to find what feels best, but to start, lower your seat about 3 inches from the height you set it at for climbing hills and riding on flat ground.

Adjusting the seat height: Raise or lower the seat post by releasing the quick-release lever (or using a wrench if there is a binder bolt). Avoid raising the post any further than what is marked as the “minimum insertion mark”. (You may need a different frame size if you need to adjust the seat height drastically). Before you ride, make sure to tighten the quick-release lever or binder bolt again. Be careful not to make the binder bolt too tight. Use a torque wrench or a mechanic to tighten the bolt according to the manufacturer’s instructions. If you expect to improve your mountain bike rapidly, you should look for bikes with dropper seatposts or consider adding one. These seat posts allow you to raise or lower the seat by pressing a button to adjust to different terrain quickly.

Part 5: 29er Mountain Bike Frame Frequently Asked Questions

Are 29ers Only for Tall People

Due to the bigger wheels and higher riding position of a 29er, many shorter MTB riders often wonder how tall you need to be to ride a 29-inch bike frame comfortably.

How Tall Do You Have to Be to Ride a 29er

If you’re shorter than 5’6″, a 27.5- or 26-inch bike may be more comfortable to ride. However, if you are 5’6″ or taller, you should be able to find a good-fitting 29er bike. So, to answer this question, a mountain biker should be at least 5’6″ tall to ride a 29er bike. Additionally, Always try out a few bikes before picking the one that fits your height best.

Can you put 27.5 Wheels on A 29er

You can replace the 29-inch wheels on your 29er mountain bike with 27.5-inch wheels, but it’s not a good idea. Your bottom bracket will be closer to the ground by making your wheels smaller. This makes it more likely that your pedals will catch on sharp turns or when you are pedaling.

What Size CO2 Cannister for 29er

When you use CO2 to pump up the tyres on your 29er bike, you should use 25g cartridges. Some 29er wheels might be able to be inflated with a 16g CO2 cartridge, but if you make a mistake or use chunkier tyres, you might not have enough gas to fill the tyre to the right psi. If you want to use 16g cartridges with your 29er, you should bring two. However, if you only want to use 25g cartridges, you only need one.

Does a 29er Bike Require Anything to Keep Functioning

Any time you ride your 29er off-road, it will get bumped and beat up. So, you’ll need to check and fix your bike’s parts regularly to make sure they keep working.
Before each ride, check and clean your suspension, chains, brakes, and tyres. After riding on dirty trails, wash your bike regularly. If you can’t do any of these things, the bike shop near you will be able to help.

Do 29ers Climb Better

29ers are superior up hills. In this sense, it’s a myth since bigger wheels are heavier, which is something that works against you when you’re climbing. On the other hand, if the ascent is riddled with rocks and steps, the larger wheel will roll over these momentum-sapping obstacles with less effort because it has more surface area to work with.

What Accessories are Recommended When Using a 29er Bike

There are various accessories available for 29er mountain bikes and protective gear like helmets and other gear that will be mentioned further down. These include:

  • Bike repair kits
  • Portable tire pumps
  • GPS trackers and fitness monitors
  • Saddlebags
  • Lights & reflective clothing
  • Hydration bladders
  • Backpacks

When it comes to safety equipment, you have a wide variety of choices available to you that you might want to think about. Above all, helmets are an important piece of safety equipment that should never be forgotten. These are some additional choices:

  • Full face helmets
  • Chest and back armor & bracing
  • Elbow & knee pads
  • Protective UV glasses/goggles
  • First aid kits

You should think of your helmet as an accessory that can be detachable easily from your bike at any time. The same should be said about locking mechanisms for bikes. Investing in a high-quality bike lock is essential if you care about the safety of your bike and do not want it to fall into the wrong hands.

Part 6: Conclusion

When shopping for a mountain bike with 29 inch bike frame, there are a few considerations you need to make before making your purchase. You should be certain that you acquire the best frame possible for your requirements because not all frames are made in the same way. In this article, we talked about a few different things related to 29er mountain bikes and how to select the frame for a mountain bike.